| Weight | 0.35 kg |
|---|---|
| Dimensions | 12 × 10 × 5 cm |
Customer matched zone "Locations not covered by your other zones"
“L293D Motor Driver/Servo Shield for Arduino” has been added to your cart. View cart
Motors , Drivers & Actuators, Servo Motor & Accessories
(6 Pcs) SG90 Micro Servo Motor 9G RC Robot Helicopter Airplane Boat Controls AB0204
SKU: AB0204
Availability:
5 in stock
₹510.00 ₹1,020.00
5 in stock
CompareRelated products
-
Motor Accessories, Motor Drivers, Motors , Drivers & Actuators, Stepper Motor
28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver
-46%
Motor Accessories, Motor Drivers, Motors , Drivers & Actuators, Stepper Motor28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver
0 out of 5(0)- Rated voltage: 5V DC
- Reduction Ratio: 64:1
- Step Angle: 5.625° /64
- Frequency: 100Hz
- Self-positioning Torque: >34.3mN.m
- Friction torque: 600-1200 gf.cm
- Pull in torque: 300 gf.cm
SKU: n/a -
DC Motors, Electronic Modules, Latest Product, Motor Accessories, Motor Drivers, Motors , Drivers & Actuators, Motors & Controllers
L298N Motor Driver Module
-48%
DC Motors, Electronic Modules, Latest Product, Motor Accessories, Motor Drivers, Motors , Drivers & Actuators, Motors & ControllersL298N Motor Driver Module
0 out of 5(0)- Current Sense for each motor.
- Heatsink for better performance.
- Power-On LED indicator.
- Double H bridge Drive Chip:Â L298N.
- Operating Voltage(VDC): 5~35
- Peak Current (A): 2
- Continuous Current (A): 0-36mA
- No. of Channels: 2
- Over-Current Protection (A): Yes
- Thermal Protection: Yes
SKU: n/a -
Electronic Components, Motor Accessories, Motor Drivers, Motors , Drivers & Actuators, Motors & Controllers
L293D Motor Driver/Servo Shield for Arduino
-69%
Electronic Components, Motor Accessories, Motor Drivers, Motors , Drivers & Actuators, Motors & ControllersL293D Motor Driver/Servo Shield for Arduino
0 out of 5(0)- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
SKU: AB0109 -
Mini Water Pump & PU Connector, Motors , Drivers & Actuators
DC 3-6V Micro Submersible Mini Water Pump for DIY Projects Kit (Ivory) AB0177
-50%
Mini Water Pump & PU Connector, Motors , Drivers & ActuatorsDC 3-6V Micro Submersible Mini Water Pump for DIY Projects Kit (Ivory) AB0177
0 out of 5(0)SKU: AB0177
A4988 Step Stick Stepper Motor Driver Controller+Aluminium Heatsink For 3D Printer
IC 4440/CD4440CS,6W 2-Channel, Bridge 19W Power Amplifier,TO-220,14 PIN PACK OF 1PCS 



